The integrated solar street lamp stands on both sides of the road, which not only plays the role of lighting, but also plays an important role in road decoration.
To ensure the length of solar energy use, which also depends on the maintenance of integrated solar street lamp.
There are normal four methods of the maintenance:
1. The daily maintenance of solar panels, solar panels are the key components to provide energy for the integrated solar street lighting system, so to ensure the integrity, cleanliness and good light collection of solar panels.It is necessary to prevent the solar panels from being damaged by hard objects or sharp objects. It is forbidden to throw sundries on the solar panels. It is necessary to clean and inspect the solar panels regularly. The branches that block the solar panels should be repaired in time.
2.In case of wind, rain, snow or steering, immediately check whether the board is after rainy season, whether the control room and battery are indoor water and water, whether the equipment works normally after storm, and whether the charge and discharge controller is damaged, etc.
3. Integrated solar street lamp light source daily inspection, this is relatively simple. First of all, it is necessary to strictly prohibit the impact of hard objects and sharp objects. At the same time, it is necessary to regularly check the working state of the light source. Once it is found that individual lamp beads are not on, it should be repaired in time to avoid the damage of the whole lamp.
4. When the weather is bad, check whether the connection line and ground wire of the battery board are in good contact and whether they fall off. Check the battery panel bracket for looseness or fracture.
Post time: Jul-20-2021